Looks great Eddie!
Nice looking bucket riser guys. Looking into doing this.
Acoustic Kits:
Ludwig Maple 3ply White Cortex 4 pc
Rukus Mod Orange Club 4 pc
DW Design 6 pc
Tama Silverstar Limited Edition Mirage 5 pc
Tama Superstar 5 pc
Tama Rockstar 4 pc
Gretsch Catalina Ash 4 pc
Slingerland 7 pc
Electronic Kits:
Yamaha DTX532k
Roland TD-27, Roland PD-85 (x4), PD-125, KD9, CY-8 (x2) VH-10, Lemon 15 and 18 cymbals
Roland SPD-SX Sample Pad
Snares:
Tama SLP Black Brass
Tama SLP G Maple
Rukus Santos/Bubinga/Poplar/Wenge
Rukus Avodire/Maple/Mahogany
1972 Ludwig Supraphonic
Hardware:
Tama, DW, Yamaha and Sonor
Cymbals:
Zildjian A Series, A Custom and K Custom
Microphones:
Miktek, Audix and Shure
Looks great.
coming along great nubdrummer
So I've gigged with the riser a few times now and I have to say, people are impressed. It really gives us a professional looking stage, and with the recently added lights, the pictures look awesome. If I didn't know better, I'd think we were playing at some major venue, rather than the back patio of a restaurant overlooking a golf course. That being said I am planning to build a smaller version for gigs (6'X6' vs 7'X7') and leave the larger one at home.
Acoustic Kits:
Ludwig Maple 3ply White Cortex 4 pc
Rukus Mod Orange Club 4 pc
DW Design 6 pc
Tama Silverstar Limited Edition Mirage 5 pc
Tama Superstar 5 pc
Tama Rockstar 4 pc
Gretsch Catalina Ash 4 pc
Slingerland 7 pc
Electronic Kits:
Yamaha DTX532k
Roland TD-27, Roland PD-85 (x4), PD-125, KD9, CY-8 (x2) VH-10, Lemon 15 and 18 cymbals
Roland SPD-SX Sample Pad
Snares:
Tama SLP Black Brass
Tama SLP G Maple
Rukus Santos/Bubinga/Poplar/Wenge
Rukus Avodire/Maple/Mahogany
1972 Ludwig Supraphonic
Hardware:
Tama, DW, Yamaha and Sonor
Cymbals:
Zildjian A Series, A Custom and K Custom
Microphones:
Miktek, Audix and Shure
^for sure adding a drum riser steps up your game a lot. It looks a lot more professional and I feel better being on a riser than on the floor.
I just joined the forum recently, I only recently got back into drumming after a twenty-plus year layoff (family, job) and this thread grabbed my attention right away!
My dad made a version of this using milk crates in the early 80's. (He actually added a 1" wooden square on the under side for the crates to fit into so they didn't move.) What a great memory.
And now you've got the wheels turning in my head about making one. Oh, my guitar players head is gonna explode....
Very cool stuff gang.
^Glad we can help motivate! I want to build a more compactable stage. The one we did is pretty big and bulky but works great as a stage... just tough to travel with
Coincidentally, just yesterday I started sourcing the parts for my smaller version. I'm thinking of tweaking the design a bit and not using the hinges, but having 4 separate pieces which are joined during setup. This would make it a little easier to pack and move.
Acoustic Kits:
Ludwig Maple 3ply White Cortex 4 pc
Rukus Mod Orange Club 4 pc
DW Design 6 pc
Tama Silverstar Limited Edition Mirage 5 pc
Tama Superstar 5 pc
Tama Rockstar 4 pc
Gretsch Catalina Ash 4 pc
Slingerland 7 pc
Electronic Kits:
Yamaha DTX532k
Roland TD-27, Roland PD-85 (x4), PD-125, KD9, CY-8 (x2) VH-10, Lemon 15 and 18 cymbals
Roland SPD-SX Sample Pad
Snares:
Tama SLP Black Brass
Tama SLP G Maple
Rukus Santos/Bubinga/Poplar/Wenge
Rukus Avodire/Maple/Mahogany
1972 Ludwig Supraphonic
Hardware:
Tama, DW, Yamaha and Sonor
Cymbals:
Zildjian A Series, A Custom and K Custom
Microphones:
Miktek, Audix and Shure
Very cool nubfrummer. When I started this thread I was hoping to get feedback along with other ideas on how to improve the design that I had come up with. It is awesome to see people taking it and running. Please be sure to post some pics so that others can see your improvements.
BTW, my original riser STILL looks and works as good as the day it was built. I haven't had even one single problem with it. Unless you count that time I spilled a beer all over the place.
PDP MX Series Drums, Zildjian A Custom cymbals, Tama Simon Phillips Gladiator Signature snare, Roc-N-Soc throne.
Almost finished with the smaller riser. I made it as small as I possibly could while still fitting my gigging kit on it. It's 6 feet wide by 5 feet deep, which coincidentally will also fit flat in my new vehicle, a Honda CRV, which has about 11 cubic feet less space than the Mountaineer I got rid off. Hopefully all my measuring and calculating was accurate because I have a gig Friday and if the weather is good and we're outside, I plan to use it. Here's a pic after I assembled it and put some drums on it to check the spacing. Since the pic was taken I glued down the carpet and now it is drying overnight.
Acoustic Kits:
Ludwig Maple 3ply White Cortex 4 pc
Rukus Mod Orange Club 4 pc
DW Design 6 pc
Tama Silverstar Limited Edition Mirage 5 pc
Tama Superstar 5 pc
Tama Rockstar 4 pc
Gretsch Catalina Ash 4 pc
Slingerland 7 pc
Electronic Kits:
Yamaha DTX532k
Roland TD-27, Roland PD-85 (x4), PD-125, KD9, CY-8 (x2) VH-10, Lemon 15 and 18 cymbals
Roland SPD-SX Sample Pad
Snares:
Tama SLP Black Brass
Tama SLP G Maple
Rukus Santos/Bubinga/Poplar/Wenge
Rukus Avodire/Maple/Mahogany
1972 Ludwig Supraphonic
Hardware:
Tama, DW, Yamaha and Sonor
Cymbals:
Zildjian A Series, A Custom and K Custom
Microphones:
Miktek, Audix and Shure
Acoustic Kits:
Ludwig Maple 3ply White Cortex 4 pc
Rukus Mod Orange Club 4 pc
DW Design 6 pc
Tama Silverstar Limited Edition Mirage 5 pc
Tama Superstar 5 pc
Tama Rockstar 4 pc
Gretsch Catalina Ash 4 pc
Slingerland 7 pc
Electronic Kits:
Yamaha DTX532k
Roland TD-27, Roland PD-85 (x4), PD-125, KD9, CY-8 (x2) VH-10, Lemon 15 and 18 cymbals
Roland SPD-SX Sample Pad
Snares:
Tama SLP Black Brass
Tama SLP G Maple
Rukus Santos/Bubinga/Poplar/Wenge
Rukus Avodire/Maple/Mahogany
1972 Ludwig Supraphonic
Hardware:
Tama, DW, Yamaha and Sonor
Cymbals:
Zildjian A Series, A Custom and K Custom
Microphones:
Miktek, Audix and Shure
What did you use to keep the sections connected? did you notice much movement while using it?
Four buckets under each section?
I've been wanting to do a version with smaller sections myself, so that it could be moved in a car if needed, so I'm appreciating your photos and descriptions a lot!
Last edited by worcesterbruce; 06-18-2016 at 11:40 AM.
I used 6 Irwin Quick-Grip clamps, the 6 inch size. They held the sections together tightly and I didn't feel the slightest movement. My kit fit on the riser perfectly and it was super easy to pack and move. The setup would have been even quicker if I didn't have a drunk guy insisting on trying to help me. I ordered a 12 foot long by 1 foot high vinyl banner with our logo printed on a black background which serves as the skirt. I just use Velcro ties to attach it to the carpet and it really looks professional. Overall I'm really happy with it, and because of it's compact size, we can use it at just about any gig.
Acoustic Kits:
Ludwig Maple 3ply White Cortex 4 pc
Rukus Mod Orange Club 4 pc
DW Design 6 pc
Tama Silverstar Limited Edition Mirage 5 pc
Tama Superstar 5 pc
Tama Rockstar 4 pc
Gretsch Catalina Ash 4 pc
Slingerland 7 pc
Electronic Kits:
Yamaha DTX532k
Roland TD-27, Roland PD-85 (x4), PD-125, KD9, CY-8 (x2) VH-10, Lemon 15 and 18 cymbals
Roland SPD-SX Sample Pad
Snares:
Tama SLP Black Brass
Tama SLP G Maple
Rukus Santos/Bubinga/Poplar/Wenge
Rukus Avodire/Maple/Mahogany
1972 Ludwig Supraphonic
Hardware:
Tama, DW, Yamaha and Sonor
Cymbals:
Zildjian A Series, A Custom and K Custom
Microphones:
Miktek, Audix and Shure
Here is the "floor plan" of my riser. 17 buckets and two pieces of chip board. I cut 12 inches off the end of the wood pieces because I didn't need it to be 8x8ft.
I don't use ANYTHING to hold it together. The weight of the carpet and drum kit keeps everything in place. I've used this riser 500 times over the last couple years....it has yet to move.
Every once in a while the guitar play will bump his foot into the front bottom corner of the riser bucket and the bucket will move a little. But it's never caused a problem.
"The problem with information on the Internet is that you can not validate it's authenticity. " -Abraham Lincoln
SILVERFOX DRUMSTICKS & SOULTONE CYMBALS Endorsing Artist.
Great work, all of you! I have all the material and start building this evening after work. Pics of the finished product to follow.
Here's the finished product. Not perfect but better than I expected given my lack of carpentry skills.
^Are you a rush fan?
I couldn't play with my high toms crank way up there like that.
Great work on the drum riser though!
Thanks! I am a Rush fan but I mostly just use the 13" tom right in front. I needed the other toms to cover a few songs but wanted to keep the 13" where it was so I decided to try Peart's setup. Turns out to be very useful. The toms are easy to get to but are totally out of the way.
I would find it extremely cumbersome to haul around a riser to gigs.
Bookmarks