continued...
There is one nagging issue on the 802 that I cannot get my head around. There is NO on/off power switch. I looked over every inch of this mixer and found nothing to turn the power off except to unplug the power supply cable from the back of the mixer. I wish the power cable was designed like a typical low voltage power supply but the cable is Behringer specific and plugging it in requires lining up a tiny plastic guide pin to seat the A/C power supply plug into the mixer.
Nothing on the bottom of the mixer to indicate an on/off switch.
I found nothing on the front of the mixer for an on/off power switch.
I checked the instruction manual and found the obvious but no indication if an on/off switch was ever designed for this unit.
Bookmarks