Quote from the Yamaha USA electronic drum section:
The DTX power must be turned on after the Hi-Hat pedal is plugged in or else the DTX may not recognize the pedal properly.
Proper Start-Up Sequence:
1.Turn off the power.
2. Connect the foot controller (HH80) or foot switch into the Hi-Hat jack on the back panel.
3. Turn the power on.
NOTE: The DTX will automatically detect the polarization of the switch and enable regular operation. Make sure the foot controller or foot switch is not depressed when turning on the power.
I think you may have a polarity issue between the HH-65 and the Yamaha PSR-293 Keyboard sustain pedal input. The underlined section above may indicate as such.
Bookmarks