.
Looking at this pic of your set up it seems to me like you are attempting to position both your 2 rack toms and your floor tom as close together as possible and at the same level. Although this may seem like a good idea at first I think you will quickly realise it isn't - it places your rack toms too far away and you will need arms like an orangutan to reach them.
If I were you I would start from scratch.
First place your throne, sit on it, put your snare on the stand in front of you where it is in a comfortable position and height. Play a few basic rudiments to see if you are striking centre comfortably. Like others have said - you don't need the tripod legs splayed out that far. Adjust them so it is stable and then loosen off the locking nut that holds the two sections together and lower the stand - adjusting the tripod legs closer together will increase the height - lower the top section to compensate. (Remove the snare from the stand when adjusting - this will make it much easier).
When you are happy with snare, place the bass drum so the pedal is in the position your right foot would be when seated comfortably. Play on the snare a bit and try using the kick on every count to ensure it is comfortable - make sure your leg or knee isn't brushing against the side of the snare drum - if it is move the bass slightly to the right so it is comfortable.
Position the hi hat in a similar way and do the same - many people prefer having the hi hat slightly closer (Something I do myself), but position it where it is comfortable for you. Make sure its not too far away from the snare - which may cause you to miss or only just hit. (I'm sure you know what I mean by that one).
Then position your toms - looking at the photograph they are too far away from you. Reposition the toms one at a time - loosen off the locking/adjusting wing nuts (support the toms when you loosen them or they will drop onto the top of your bass drum and mess up the finish) Start with the smaller drum first and move then so they are kind of hanging over the back of the bass drum - or as far back as they will go. Do the same with the second tom. Try to get them both at the same height and at the same angle (sloping towards you). Stand in front of the kit - it will look right if it is!
Finally your floor tom - personally I would not try to keep it at the same level as your mounted toms. Place it to your left side, leave a similar sized gap between your snare drum and the floor tom as you have between the opposite side of the snare drum and the chromed centre tube of your hi hat stand. You should have plenty of room for your right leg so you are not banging your leg against the floor tom. Try setting the height at the same level as your snare, adjust to preference later. Pick up a stick with your left hand, sit on your throne and strike the drum, the centre of your floor tom should be where the tip of your stick naturally lands. Then try with your right hand. If you are striking the rim lower it a little - if you are striking your leg raise it. Simples.
Take a look at the Picture Northern Redneck has posted earlier in this thread to see how he has positioned his toms and floor tom. He's done this for a good reason and this is what you should be aiming for.
Once you have all your drums and hi hat positioned, then place your cymbals - again they should be easy to reach without overstretching and positioned so they are angled towards you. You should be able to strike them comfortably without the stick biting into the edge of the cymbals - if you get into this habit your cymbals won't last long.
After doing this you will still be making minor adjustments for weeks (and possibly months to come) this is normal and all part of the fun!
Good luck
Bookmarks