Is yours broken? Can it be fixed? If so, I found this somewhere else and copy and pasted. If your looking for the press fit knob for the Zoomatic, they can be found too.
Quote:
"The problem with the Zoomatic Strainer is that people over tighten it! It is a very functional and nice design for a strainer, but when it gets over-tightened there is a pressure fitted washer that begins to loosen and eventually break or separate from the tension knob. This renders the strainer useless since it needs that to keep the tension on the snare wires."
"Slingerland decided to add what I have heard referred to as a "Dummy Tab" to the back of the strainer to stop people from over tightening, but all that did was allow for people to tighten into the wrap causing a depression in the finish!"
"The fix is actually very simple and all you need is a spring! The spring in the picture is 3/4" long and 1/2" wide. Other spring sizes will work and you can even take a tension spring from a lug casing and cut it with wire cutters. A looser spring is better because it needs to have flexibility. A stiff spring is not the best way to go. Experiment with the spring to get the desired affect. The washer needs to be similar in size to the original so it holds the strainer arm in place."
End quote~
Here's a pic of the Zoomatic press on knob. Does it look like yours?
![]()
Bookmarks