Cool!!!! Did you figure this on your own or did you hear of someone doing it?
Okay you all know that i luv my bass sound. (short and that has a click sound) well i noticed that most metal drummers have a clicky sound to their bass drums.
i came up with an idea that does not use a trigger to make that click sound
take some duct tape and make it so that both sides are sticky. put it on your bass head, then put a coin (i used a quarter) on the tape.
then put a layer or two of duct tape over the coin and start clicking away.
i did this and now my bass sounds extremely beastly.
Ostinato is the way to go!
Cool!!!! Did you figure this on your own or did you hear of someone doing it?
it came from my very own brain dc.
oh yeah and some help from my friend who was trying to do this.
except he ended up using beads and breaking his drumhead.
Ostinato is the way to go!
You might try double-sided tape to fasten the quarter to the bass head; that way you don't have to wrestle the duct tape around to make it sticky-side out, then cover it with duct tape in the usual way.
You'll find double-stick tape next to the regular Scotch tape at most stores, usually in the stationery or school supplies department...
(click-click-click-click...)
keep the beat goin' ... Don't keep it to yourself!
Charlie
"If a man does not keep pace with his companions, perhaps it is because he hears a different drummer. Let him step to the music which he hears, however measured or far away." --Henry David Thoreau, "Walden," 1854
"There's a lot to be said for Time Honored tradition and value." --In memory of Frank "fiacovaz" Iacovazzi
"Maybe your drums can be beat, but you can't."--Jack Keck
The only thing you need to do is tape the quarter to the drumhead with sticky side down. If there's a sticky side that the beater touches you're gonna have major problems. I used to use duct tape to secure my kick pads for my beaters to hit. However, after time the beater wears into the sticky side and it took forever to remove it from my beater. Make sure you remove the bass head before this happens. For you light footers out there you might not have this problem. Blessings.....
I might try this, thanks for the Idea Ringo
Paiste Posse
14inch 2002 series Sound Edge Hi-hats
16inch and 18inch Signature series Fast crashes
20inch 3000 series Ride
18inch PST5 series China
Pearl Forum Series drum set
Pearl Chad Smith Signature snare(steel shell)
Tama Iron Cobra Chrome
RIP Frank - You will be remembered
ok, i dont quit understand, i really wanna try this. so you make the tape stick on both sides.. then you put the coin on the outside of the tape, and put a couple more peices of tape over the 2 sided sticky tape?? lol
it just makes the bass klick?
play till the day i die. it makes more sense that way.
"You should set up your drums around the toilet. You know you must use it everyday and lets be realistic, nothing better is going on when your sitting on there. Why not take care of business and play the drums." silver dragon sound
im not sure what he means by that, but its worth a shot.
i might try it befor i have to replace my head right now i like the boom mine makes
play till the day i die. it makes more sense that way.
"You should set up your drums around the toilet. You know you must use it everyday and lets be realistic, nothing better is going on when your sitting on there. Why not take care of business and play the drums." silver dragon sound
actually.. i was experimenting yesterday, and i tighted my bass drum head pretty tight on my reso, and batter, and it still made a deep thud.. accept it was more controlled. how do you tune urs drummerdavie? i still have yet to find that perfect sound.
ive got the back sorta tight and the front a little losser.
the exact psi is batter 150.
reso 130.
it sounds like a cannon but has nice gosts and dbl bass roll.
i dont like to play hevey mettal so i like to use acents and stuff on my bass and rarely use dbl
play till the day i die. it makes more sense that way.
"You should set up your drums around the toilet. You know you must use it everyday and lets be realistic, nothing better is going on when your sitting on there. Why not take care of business and play the drums." silver dragon sound
have you tried just using plastic hammers?
Also mic positioning gets ya that sound too.
Roland TD 30KV
Gretsch Birch Catalina Wine red.
Paiste PST5's
Paiste Alpha Paiste Dark Energy
Gibraltar Hardware Pearl 2002c Eliminator
Minute 36 - Facebook
Tai Fighters
150 PSI? then you must have a drum dial right?
keep the beat goin' ... Don't keep it to yourself!
Charlie
"If a man does not keep pace with his companions, perhaps it is because he hears a different drummer. Let him step to the music which he hears, however measured or far away." --Henry David Thoreau, "Walden," 1854
"There's a lot to be said for Time Honored tradition and value." --In memory of Frank "fiacovaz" Iacovazzi
"Maybe your drums can be beat, but you can't."--Jack Keck
lafrin,
what i mean by clicking is that the sound that most metal drummers have out of their bass drums.
Examples: JJ, Adler, Bittner, Vinnie Paul, most metal drummers have a clicky bass sound.
Ostinato is the way to go!
i tried this acept i used masking tape and dog tags and i put two layers on so i have two tags on the head it sounds f!@#ing amazing
I have seen quit a few people do this. Another thing you might try is to tape a bottle cap to the beater. Different types of caps will give you different sounds.
Da' Bum
Rockin' the beat for fadedblue
Keepin' time for Andy Harrison & the AOP
http://www.facebook.com/fadedbluemusic
DW Performance 5 pc. in White Marine Pearl
1972 Pearl Deluxe Custom 5 pc. in blue sparkle
KAT KT-3
Paiste cymbals
Gibraltar hardware
Axis pedals
Vic Firth sticks
Evans heads
play till the day i die. it makes more sense that way.
"You should set up your drums around the toilet. You know you must use it everyday and lets be realistic, nothing better is going on when your sitting on there. Why not take care of business and play the drums." silver dragon sound
read a SLIPKNOT article once joey does that quarter on the bass head thing
Many have done that, but there are a few alternatives that work even better.
Gibraltar "Click Pads" - My favorite. Great click when used with a plastic beater, but still lets the low overtones through.
Danmar - These are actually just a straight up metal plate with a foam backing that stick to the head. Give a really aggresive click. More suited for very aggressive metal.
With either, I have found the Evans EMAD2 tuned low to work the best.
Serveunion, welcome to Drum Chat! And thanks for giving us your experience with the click pads. Hope to see a lot more of you around here!
Quoting gonefishin: Just have some bacon with ya when you go pick her up..........youre an instant chick magnet.
For coupons and specials, join the Drum Bum mailing list.
Buy Gifts for Drummers. And don't miss the free Drum Lessons!
It creates a lot of attack on the bass drum so the double bass hits are articulated. I have heard using a coin or large fender washer for this sometime ago as well. never tried it becasue I never needed for the type of music that I play. but congradulations on your find. It is fun to experiment on your own to come up with breakthroughs to fill a particular sound or need...
Bookmarks