I am using a pair of Rockville APM 5 monitors and they are very loud. Bass is a bit thin, but would probably work for your application.
Hello fellow drummers. I own a set of Traps A400 which I converted them to electronic drums due to the reason that I live in an apartment and don't want to gall the neighbors. My main concern at the moment is that I have connected the drum module with the PC and any sound comes from a pair of PC speakers (2.1 system A120 Creative) and the output level is really low which makes any hearing difficult.
I am considering the possibility to change them with an active pair of studio monitors. My question is if a studio monitor can handle this particular job as I want it only for drum practice and wan't increase the volume too high or I need to buy PA speaker?
My budget is around 150 euros (apx 170 $). Any reviewing is much appreciated
Drums Traps A400 with rack
Cymbals all Meinl
Raker 14" HH
Raker 20" heavy and 21" medium Rides
Raker 16" medium & heavy crashes
MB10 17" china
Lightning 10" splash
Hardware: DW 5002 twin pedal, DW 9000 HH stand and Pearl BR-2000 stool, Adam CS-90 x1 cymbal boom stand
I am using a pair of Rockville APM 5 monitors and they are very loud. Bass is a bit thin, but would probably work for your application.
Do I need such a powerful monitor as yours? Drums are installed in a particular small room and I hardly think I'll ever need that much power
Drums Traps A400 with rack
Cymbals all Meinl
Raker 14" HH
Raker 20" heavy and 21" medium Rides
Raker 16" medium & heavy crashes
MB10 17" china
Lightning 10" splash
Hardware: DW 5002 twin pedal, DW 9000 HH stand and Pearl BR-2000 stool, Adam CS-90 x1 cymbal boom stand
I always prefer a bit more power, and turn down the amp, as opposed to having a weak amp and cranking it up to distortion. Rockville makes a lower powered set as well.
Have you ever tried IEMs? Would also do the job ?
Drums Traps A400 with rack
Cymbals all Meinl
Raker 14" HH
Raker 20" heavy and 21" medium Rides
Raker 16" medium & heavy crashes
MB10 17" china
Lightning 10" splash
Hardware: DW 5002 twin pedal, DW 9000 HH stand and Pearl BR-2000 stool, Adam CS-90 x1 cymbal boom stand
I use IEM's and they work fine, some people do not like to use IEM's or Headphones and want to "hear the music". I use both. IEM's work great when family is sleeping. Monitors are nice to actually hear - also to practice with others in lower controlled volume situations.
Stu
Are your speakers self-powered with built in amp? If not, you need an amplifier between the module and the speakers. At least that was the case 20 years ago. When I ran my Roland and Alesis drum modules together, (better assignment of pad to controller) I ran them into a mixer and then through a mini PA that I used as "stage volume." That was 20 some years ago but I believe the basic fundamentals of amping still apply. The same held true when I went to a complete solution with my Hart pro system. Module to mixer to amps to speakers.
Signature here
My question is, do I need more than 1 drivers for IEMs? Also is better to look for custom made ear plags? Have seen different sizes from manufacturers and wondering if they fit exactly into the canal.
Last edited by corsair; 05-23-2018 at 05:29 PM.
Drums Traps A400 with rack
Cymbals all Meinl
Raker 14" HH
Raker 20" heavy and 21" medium Rides
Raker 16" medium & heavy crashes
MB10 17" china
Lightning 10" splash
Hardware: DW 5002 twin pedal, DW 9000 HH stand and Pearl BR-2000 stool, Adam CS-90 x1 cymbal boom stand
For the pc speakers, yes they do have an amplifier. The studio monitors, if I conclude to buying them, would also be active. As I said I will use them only for low volume practice and/or playback practice
Drums Traps A400 with rack
Cymbals all Meinl
Raker 14" HH
Raker 20" heavy and 21" medium Rides
Raker 16" medium & heavy crashes
MB10 17" china
Lightning 10" splash
Hardware: DW 5002 twin pedal, DW 9000 HH stand and Pearl BR-2000 stool, Adam CS-90 x1 cymbal boom stand
Bookmarks