Results 1 to 12 of 12

Thread: Hardware bag alternative

  1. #1

    User Info Menu

    Default Hardware bag alternative

    After using it for the last 3 gigs, Iím comfortable with recommending this as an alternative to traditional hardware bags;
    The Gator Frameworks Microphone Stand Bag
    501D663E-9F7D-418C-B0F7-F025A851C97D.jpeg
    1D36E6C3-3AF3-41A6-9D17-E99EFAA97477.jpg

    I had been using a Humes & Berg Seeker with wheels. Itís a great bag...but there were 3 issues that annoyed me;

    1) I had to either collapse or disassemble my cymbal & hi-hat stands to fit them in the bag
    2) unless I wrapped each stand in a towel or blanket, they would rub on each other. I would literally find very fine silvery powder in the bottom of the bag. It was only a matter of time until the plastic handles on my new DW stands would get caught on each other and break.
    3) I would have to get down on my knees in front of the bag and carefully pack each piece. Iím too old and fat to enjoy that.

    As you can see, the Gator mic bag has 6 individual compartments. One end unzips...and the empty bag will actually stand up on itís own. Itís also plenty long; long enough that it will easily hold my stands and hi-hat stand without collapsing them.
    Hereís how easy it is now; I set the empty bag on end, unzip the lid and flop it over the side. I grab each stand, fold the legs up, and just drop it down in the bag...this includes the hi-hat stand, throne base and snare stand. Zip the lid up, and Iím DONE! It literally takes me less than a minute to pack up my hardware now. AND....I donít even have to bend over!
    I can now use a small duffle bag to hold my throne seat, pedal, stick bag and rail mount.
    -Brian

    "Too many crappy used drum stuff to list"

    Play the SONG......not the DRUMS!!!

    "I think that feeling is a lot more important than technique. It's all very well doing a triple paradiddle - but who's going to know you've done it? If you play technically you sound like everybody else. It's being original that counts." ~ John Bonham

  2. #2

    User Info Menu

    Default Re: Hardware bag alternative

    Hmmmm interesting.. I will look into that for sure, thanks for the review.
    Sonor Essential Force Birch

    Mapex Saturn V

    Zildjian K and Stagg DH Cymbals

    Decide whether this is love for the craft or simply an ego thing.

    http://www.redskymary.com/ NOT MY BAND, JUST A GREAT LOCAL BAND WHO SHOULD BE SOOO MUCH BIGGER IMO

  3. #3

    User Info Menu

    Default Re: Hardware bag alternative

    That is an interesting idea thanks

  4. #4

    User Info Menu

    Default Re: Hardware bag alternative

    We’ll see how long it lasts. Mic stands are pretty light in general, so it’s not designed for a ton of weight. Keep in mind that I use all DW 6000 lightweight stands. Some Larger and heavier stands may not even fit in the compartments, but even my double braced heavy duty Mapex stand fits.

    I bought it on clearance for around $40 at a local store. I think regular price is only around $60-$70. I intended to use it for our mic stands, but then decided to give it a try. Obviously, it’s probably not for those of us with big kits that gig constantly. But, those of us with small, simple setups that gig a couple times per month...it could be a nice option.
    The overall design works excellent. The individual compartments and self-supporting design are fantastic.
    -Brian

    "Too many crappy used drum stuff to list"

    Play the SONG......not the DRUMS!!!

    "I think that feeling is a lot more important than technique. It's all very well doing a triple paradiddle - but who's going to know you've done it? If you play technically you sound like everybody else. It's being original that counts." ~ John Bonham

  5. #5

    User Info Menu

    Default Re: Hardware bag alternative

    Nice review. Looks pretty sturdy!

  6. #6

    User Info Menu

    Default Re: Hardware bag alternative

    Quote Originally Posted by drummerjay56 View Post
    Great suggestion! I picked up the Gator bag for $39.00. Lite, built very well and has 6 sections. Holds 3 cymbal stands, hh stand, snare stand and floor tom legs with no need to take any apart. I also use the DW light weight cymbal stands so the bag loaded up is easy to carry. Thanks for recommending it.
    That’s awesome. Mine is still fairly heavy, since my Gibraltar throne base and snare stand are very heavy. Those 2 alone weigh as much or more than my 3 DW cymbal stands and DW hi-hat stand put together. So far, the Gator mic stand bag has held up, but it’s only been 3 or 4 gigs. I really love it...it’s immensely easier to pack than a regular hardware bag and the individual compartments offer outstanding protection. Not having to bend over or get down on my knees to pack a hardware bag is a huge plus as well.
    -Brian

    "Too many crappy used drum stuff to list"

    Play the SONG......not the DRUMS!!!

    "I think that feeling is a lot more important than technique. It's all very well doing a triple paradiddle - but who's going to know you've done it? If you play technically you sound like everybody else. It's being original that counts." ~ John Bonham

  7. #7

    User Info Menu

    Default Re: Hardware bag alternative

    yeah I couldn't get away with that. But it is annoying for sure
    13pc Yamaha Maple Custom Vintage (24pc in total) | 12pc PDP X7 | 9pc Ludwig Jr. | 8pc Pork Pie ZebraWood | 6pc Sonor | 4pc Ddrum Dominion | 5pc Orbitone |4pc Sonor Martini | 50 Snare drums and growing!

  8. #8

    User Info Menu

    Default Re: Hardware bag alternative

    The individual compartments sounds good to me, I like the idea of the stands being protected from each other. I have tried several different types of cases for hardware. I started with the old trap case I used over 35 years ago, but it was extremely heavy, and I had to completely collapse and in some cases separate the sections of stands, which made setup and tear down take longer. Then I tried a duffel type hardware bag, but it was still heavy, and without wheels, very unwieldy. From there I got an SKB golf bag hard case, which was good because I could keep all stands fully extended, and had wheels, but had to be laid flat to open, which took up a lot of floor space when setting up. It was also very big and heavy. After that I got a Gator hardware cart, which can be loaded while upright and was easy to wheel around, but was surprisingly heavy when loaded. The latest thing, which I found for $18 dollars in a thrift store, is a slightly smaller golf bag hard case. What's good about this is the top half of it comes off, so when I open it, all my hardware is easily accessible and it stands up vertically. It's still heavy, but I'm using the bare minimum amount of hardware so there's nothing I can do about that. It has wheels as well, and it takes up a little less space. I've used it several times, and it's working well, but I'm always on the look out for a better solution. I'm keeping the Gator cart in case I decide to go back to it, but I've listed the SKB Golf case for sale.


    2017 DW Design 6 piece Tobacco Burst
    Evans, Remo

    2016 Tama Silverstar Limited Edition Mirage 5 piece Chrystal Ice
    Evans

    2010 Tama Superstar 5 piece Birch BPG
    Evans, Aquarian

    200? Gretsch Catalina Ash 4 piece Black and Silver Sparkle
    Evans

    1980 Slingerland 7 piece Poplar/Maple White
    Evans

    Yamaha DTX532k

    Roland SPD-SX Sample Pad

    Alessis Sample Pad

    Tama SLP Black Brass snare

    Tama SLP G Maple snare

    Tama hardware and pedals
    DW5000 double bass pedal, single bass pedal and high hat

    Zildjian

    13" New Beat High Hats
    14" New Beat High Hats
    14" A Custom High Hats
    14" K Custom Dark High Hats
    6", 8", 10" Fast Splashes
    12" A Custom Splash
    15" A Custom Crash
    15" K Custom Dark Crash
    16" A Fast Crash
    16" K Custom Dark Crash
    17" A Custom Projection Crash
    18" A Custom Projection Crash
    18" A Rock Crash
    18" China
    18" A Medium Thin Crash
    19" A Rock Crash
    20" A Ride
    20" A Custom Ride(X2)

    Miktek, Audix and Shure Mics

  9. #9

    User Info Menu

    Default Re: Hardware bag alternative

    Quote Originally Posted by nubdrummer View Post
    The individual compartments sounds good to me, I like the idea of the stands being protected from each other. I have tried several different types of cases for hardware. I started with the old trap case I used over 35 years ago, but it was extremely heavy, and I had to completely collapse and in some cases separate the sections of stands, which made setup and tear down take longer. Then I tried a duffel type hardware bag, but it was still heavy, and without wheels, very unwieldy. From there I got an SKB golf bag hard case, which was good because I could keep all stands fully extended, and had wheels, but had to be laid flat to open, which took up a lot of floor space when setting up. It was also very big and heavy. After that I got a Gator hardware cart, which can be loaded while upright and was easy to wheel around, but was surprisingly heavy when loaded. The latest thing, which I found for $18 dollars in a thrift store, is a slightly smaller golf bag hard case. What's good about this is the top half of it comes off, so when I open it, all my hardware is easily accessible and it stands up vertically. It's still heavy, but I'm using the bare minimum amount of hardware so there's nothing I can do about that. It has wheels as well, and it takes up a little less space. I've used it several times, and it's working well, but I'm always on the look out for a better solution. I'm keeping the Gator cart in case I decide to go back to it, but I've listed the SKB Golf case for sale.
    I found the same issues you listed in your post about wanting individual compartments to protect the stands from each other.

    I invested in 2 SKB hardware cases but after a few gigs, I noticed dents in the cymbal stands tubes.



    The big utility box can hold a ton of gear but it's too heavy to lift comfortably without needing some help.



    The thinner TSA "approved" case has straps but are totally useless to keep the stands from shifting.



    Both can fit rather snug in the trunk of a small 4 door import.


  10. #10

    User Info Menu

    Default Re: Hardware bag alternative

    Quote Originally Posted by late8 View Post
    I found the same issues you listed in your post about wanting individual compartments to protect the stands from each other.

    I invested in 2 SKB hardware cases but after a few gigs, I noticed dents in the cymbal stands tubes.



    The big utility box can hold a ton of gear but it's too heavy to lift comfortably without needing some help.



    The thinner TSA "approved" case has straps but are totally useless to keep the stands from shifting.



    Both can fit rather snug in the trunk of a small 4 door import.

    I tried wrapping my stands in small blankets, but that turned out to be so teadious and time consuming it drove me crazy. The last thing I want to do after a 4hr gig is get down on my knees on the floor and roll up stands like a burrito and stuff them in a bag. LOL. Now, I literally stand beside the case, unzip the top, pick up a stand, fold the legs in and drop it down into the case. Done in 90 seconds and no damage to the stands. Set-up is just as easy. No more finding broken handles, metal shavings or loose setscrews. It took 90% of the anxiety out of tear-down.
    -Brian

    "Too many crappy used drum stuff to list"

    Play the SONG......not the DRUMS!!!

    "I think that feeling is a lot more important than technique. It's all very well doing a triple paradiddle - but who's going to know you've done it? If you play technically you sound like everybody else. It's being original that counts." ~ John Bonham

  11. #11

    User Info Menu

    Default Re: Hardware bag alternative

    Quote Originally Posted by N2Bluz View Post
    I tried wrapping my stands in small blankets, but that turned out to be so teadious and time consuming it drove me crazy. The last thing I want to do after a 4hr gig is get down on my knees on the floor and roll up stands like a burrito and stuff them in a bag. LOL. Now, I literally stand beside the case, unzip the top, pick up a stand, fold the legs in and drop it down into the case. Done in 90 seconds and no damage to the stands. Set-up is just as easy. No more finding broken handles, metal shavings or loose setscrews. It took 90% of the anxiety out of tear-down.
    Going off of your review, I'm going to invest in a few of those cases before I start gigging again. Thanks for taking the time to post your findings.

  12. #12

    User Info Menu

    Default Re: Hardware bag alternative

    Nice idea.

Tags for this Thread

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •